Manufacturers

KICK2 Maximize

KICK2

KICK2 by Evolv

MADE IN USA

The Kick2 is a power regulated digital switch-mode DC-DC converter for personal vaporizers in the form of a drop in module. It features controlled power from 5 to 15 watts and runs from a single lithium battery.  

More details

KICK2

Availability: coming soon, choose other please


Notify me when available

45,00 € tax incl.

Add to cart

Evolv Kick 2, the latest version of one of my favorite vaping accessories. If you’re not familiar with the original Kick, it’s a drop-in module for mechanical mods that sits on top of a battery. It gives you variable-wattage performance, allowing for consistent vaping experiences no matter what mechanical mod or juice delivery system used. For example, if you set the Kick for 9.5 watts, you’ll get 9.5 watts whether your atomizer is 1.2 ohms or 2.8 ohms. Additionally, the Kick provides short-circuit protection.

WARNING: NO REVERSE POLARITY PROTECTION !

The Kick 2 has several improvements over its predecessor, as well as some design changes. The device can be set as high as 15 watts. The original model capped out at 10 watts. The suggested atomizer resistance range is 0.5 to 3.3 ohms. The previous version listed 1.3 to 3.0 ohms as the workable range. These two improvements make the Kick 2 potentially attractive to vapers that like to use sub-ohm coils on rebuildable devices. I’ll be testing the Kick 2 with a sub-ohm coil on a rebuildable dripping atomizer.

As far as design goes, there’s one significant change. The original Kick features a contact spring to ground the device. The Kick 2 uses two grounding posts. The posts are sturdier and useful for mods that have internal threading (the Kick 2 can be screwed in). On the downside, the original’s grounding spring offers a little more flexibility, since it can moved to ensure contact.

On paper, the Kick 2 sounds like another winner from Evolv. The original is one of the most popular and useful accessories for mechanical mods. The Kick 2′s increased range makes it even more useful, extending its appeal to sub-ohm vapers. 

The Kick2 is a power regulated digital switch-mode DC-DC converter for personal vaporizers in the form of a drop in module. It features controlled power from 5 to 15 watts and runs from a single lithium battery.  It works in exactly the same way as the original Kick but boasts a higher maximum power and employs synchronous rectification for superior efficiency. The Kick2 also boasts mod resistance compensation to ensure a more accurate power delivery.
 
Output Power:5 Watts to 15 Watts
Output Voltage:2 Volts to 6.3 Volts
Output Current:6 Amps
atomizer resistances:0.5 Ohms to 3.3 Ohms
low battery cutoff:2.7 Volts loaded

Write your review

KICK2

KICK2

KICK2 by Evolv

MADE IN USA

The Kick2 is a power regulated digital switch-mode DC-DC converter for personal vaporizers in the form of a drop in module. It features controlled power from 5 to 15 watts and runs from a single lithium battery.  

Write your review